IDENTIFICATION OF THE MATERIAL AND SUPPLIER PENGENALPASTIAN BAHAN DAN SYARIKAT
Product Name
ZINCALUME®, GALVALUME®, TRUECORE® and ZACS® STRIP AND SHEET
Use
Metal fabrication, building framing, roofing and wall cladding
Supplier
BlueScope Steel Malaysia Sdn Bhd
Lot 1551 Jalan Bukit Kapar 42200 Kapar
Selangor Darul Ehsan
Malaysia
Tel: (603) 3361 6888 Fax: (603) 3361 6889
Emergency Contact
National Poison Centre, Universiti Sains Malaysia, 11800 Penang, Malaysia
Tel: 1-800-88-8099/04-6570099 or 012 4309499 (After Office Hour)
Fax: 04-6568417
Nama Produk
:
ZINCALUME®, GALVALUME®, TRUECORE® dan ZACS® STRIP AND SHEET
Kegunaan
:
Pembikinan logam,bumbung dan kemasan dinding.
Pembekal
:
BlueScope Steel Malaysia Sdn. Bhd
Lot 1551 Jalan Bukit Kapar, 42200 Kapar
Selangor Darul Ehsan.
Tel: (603) 3361 6888 Faks: (603)3361 6889
Nombor Telefon Kecemasan
:
Pusat Racun Negara, Universiti Sains Malaysia, 11800 Pulau Pinang, Malaysia
Tel: 1-800-88-8099/ 04-6570099 or 012 4309499 (After Ofiice Hour)
Faks: 04-6568417
2.
COMPOSITION/INFORMATION ON INGREDIENTS KOMPOSISI / MAKLUMAT RAMUAN
Low carbon steel strip with a hot dipped zinc/aluminium coating.
Base Product
CAS no.
Proportion
Iron
7439-89-6
80 – 100%
Zinc
7440-66-6
1-10%
Aluminium
7429-90-5
1-10%
Surface Treatment
CAS no.
Proportion
This surface of this product will have the following combinations of chemicals present at low levels, resulting from the use of anti-corrosion surface treatments :-
Hexavalent chromium compounds, used on all products
Mixture
< 20 mg/m2
Acrylic Resin, used only on ZINCALUME®, TRUECORE® and ZACS®
Mixture
< 1 g/m2
Copper Phthalocyanin Blue Pigment, non hazardous, used only on TRUECORE®
Not Available
< 300 mg/m2
Kepingan keluli rendah karbon dengan saduran zink/aluminium rendaman panas.
Produk Asas
No CAS
Perkadaran
Besi
7439-89-6
80 – 100%
Zink
7440-66-6
1-10%
Aluminium
7429-90-5
1-10%
Rawatan Permukaan
No CAS
Perkadaran
Permukaan produk ini boleh disadur dengan kombinasi bahan kimia berikut yang wujud pada paras rendah, hasil daripada penggunaan rawatan permukaan anti-karat:
Sebatian kromium heksavalen, digunakan dalam semua produk
Campuran
< 20 mg/m2
Resin akrilik, digunakan di atas ZINCALUME®, TRUECORE® DAN ZACS®
Campuran
< 1 g/m2
Pigmen biru Kuprum Phtalosianin, tidak berbahaya, digunakan hanya untuk TRUECORE®
Tidak didapati
< 300 mg/m2
3.
HAZARDS IDENTIFICATION PENGENALPASTIAN BAHAYA
Hazard Classification
Not a Hazardous Chemical as defined in Occupational Safety and Health (Classification, Packaging and Labelling of Hazardous Chemicals) Regulations 1997.
However, industrial processes such as grinding or welding can generate dust or fume from this product, which can be hazardous if inhaled.
Not classed as a Dangerous Good as defined in the United Nations Recommendations on the Transport of Dangerous Goods, 14th Edition.
Safety Phrases
S22
Do not breathe dust
S24
Avoid contact with skin
S37
Wear suitable gloves
Pengelasan Bahaya
:
Tidak berbahaya sebagaimana ditakrifkan dalam Peraturan-peraturan Keselamatan dan Kesihatan (Pengelasan, Pembungkusan dan Pelabelan Bahan Kimia Berbahaya) 1997
Walau bagaimanapun, proses-proses industri seperti mengisar atau mengimpal boleh mnghasilkan habuk atau wasap daripada produk ini, yang mungkin berbahaya jika disedut.
Tidak dikelaskan sebagai Bahan Berbahaya sebagaimana ditakrifkan dalam United Nations Recommendations on the Transport of Dangerous Goods, Edisi ke-14
